In order to provide you with the best service, our website uses cookies. By continuing to browse the site you are agreeing to Cookie Policy

Loading color scheme

E-Laser 1200

 

 

E-Laser 1200 comes from the synergy of Italian design and Japanese technology.
E-Laser 1200 express its maximum potential if bundled to the Single Head 12 Colors embroidery machine from Happy Japan but one of the most important features is for sure the ability to be attached to any single or multi head embroidery machine, regardless to the model or brand. It is possible to equip with a “Laser Needle” up to 16 heads simultaneously.
The use of Optical Fiber technology to carry the laser beam to the cutting area permit to use high power laser source, up to 75w. This allow to cut even difficult materials in a single pass, without the need of double or triple passes. In this way high quality cuts are guaranteeds.

E-Laser 1200 may be equiped with 30w, 50w and 75w Co2 sealed laser sources.
Thanks to the new fully digital electronic 2.0 and to the use of a powerfull microprocessor we could introduce a 7 power levels management that can be easly selected during the same job. Now you can chose your multi layer applique materials without troubles.

WHAT YOU CAN ACHIEVE VIDEO GALLERY

The synergy with Happy Japan, partner of Proel TSI, brought to a deep integration between the E-Laser 1200 and the Happy Japan embroidery machine positioning the 12-needle E-Laser 1200 as the industry’s most capable equipement in its category, with unique fearures as:
• Maximum precision and accuracy of cuts
• Embroidery Machine working area fully used
• Larger Maximum working area in its category, 400mmx1200mm
• Ear-to-Ear Caps Working area at the top of its category, 80mmx360mm
• Cutting speed 1200 rpm

DEVICE for CUTTING on CAPS

This device has been implemented to have an off-set between laser and needle practically zero. In this way you can get a precise and optimal cut on all areas of the cap. By E-Laser and to the new device for caps your embroidery machine will be able to easily produce caps with highly precise applications or with distress look.

 

 

USABLE SOFTWARE for LASER CUTTING

Proel software for laser cutting FOCUSCUT X is the best program to manage laser cuts with E-Laser 1200 because the operator can use a lot of automatic tools for: auto-recognizing the embroidery edges, creating laser lettering and true type laser lettering, automatic creation of kiss cutting levels, etc. Possible also to manage the laser cuts with any client punching system.

 

TECHNICAL SPECIFICATIONS

Working area (WxD) 400 x 520 mm - 400 x 1200 mm
Working Area on Caps 70 x 360 mm
Max Speed 1200 rpm
Laser power 30/50/60/75 W
Spot Diameter 100 micron
Fumes suction External and internal unit
Software
FOCUSCUT X - Included
Languages EN / IT / FR / GE / SP / PO
User Interface Personal computer - Machine control panel
Electrical input
1phase 220/240 Vac ±10% - 50/60Hz ±2%
Absorbed power max
1200 VA
Dimensions (WxDxH)
290 x 450 x 1230 mm (E-Laser 1200)
845 x 778 x 871 (Embroidery Machine)
Weight max.
186 Kg (80Kg E-Laser 1200 + 106Kg Emb. Machine)
Laser product Class
class 1 (EN-60825-1:2003-02)
class I (USA-CDRH 21 CFR)

 

The Manufacturer reserves the right to make modifications and improvements without prior warning

To receive further information on the Proel Products, please compile and send us the following form
Something went wrong, please try again later. Thank You! Your message has been sent. Please enter a correct Captcha answer.