In order to provide you with the best service, our website uses cookies. By continuing to browse the site you are agreeing to Cookie Policy

Loading color scheme

Cometa

 

 

Laser Plotter Cometa is the large laser cutting machine of the Proel range for laser cutting and laser engraving. This machine, available in the 25, 50 or the 100 Watt version, is ideal for those who need to cut large sizes of material (up to 1600x850 mm) or even to cut material supplied in rolls.

The machine equipped with a CO2 Laser source of 25, 50, 100 or 200 Watt (air-cooled), a cutting head driven on two axes by powerful brushless motors, the possibility of assembling either a fixed cutting plane or a motorized cutting plane (for automatic loading/discharge of material to be worked/finished). Usable cutting area (1600x850 mm), external fume suction device that may be connected to a filtering unit, Ethernet interface for connection to a Personal Computer, possibility of control at three power levels (usually one for cutting and two for engraving), possibility of selecting two cutting modes: constant speed or variable speed for optimizing times, cleaning of the cutting head using air produced by an internal pump or with air produced by an external source or with gases specific for laser cutting (usually Nitrogen). Laser pointer for positioning the material to be used.

WHAT YOU CAN ACHIEVE

MAIN OPERATING FUNTIONS

  • Memorization of work files until exhaustion SD Card (4 GB capacity)
  • Management of 32 levels of laser power
  • Setting of the cutting/engraving speed
  • Setting of the cutting head handling mode
  • Possibility of manually positioning the cutting head by means of the control panel
  • Possibility of manually handling the cutting plane advancement by means of the control panel
  • "Pause Cut" function
  • Possibility of continuing an unfinished job even after an electrical power failure
  • Self-diagnostic feature
  • Cutting assisted by a videocamera
  • Cutting of compositions (automatic repetition of the same cutting shape) - remotely
  • Management of different fume suction modes
  • Possibility of cutting the material in a straight line by means of the control panel - remotely
  • Work cycles count for each job
  • Display of the position of the cutting head (in X,Y coordinates) - remotely

 

TECHNICAL SPECIFICATION

Electrical input
1phase 230VAC ±10% - 50/60Hz ±2%
Absorbed power max.
2500 W
Dimensions (WxDxH)
2270x1770x1200 mm
Weight max.
470 Kg
Noise emission
< 70 dB (without fumes suction unit)
Drive motors type
brushless
Working area (WxD)
1600x850 mm (63"x33")
Cutting plane size(WxD)
1680x940 mm (66"x37")
Cutting plane type
metal grid / fixed
Fumes extraction
top and bottom suction system
Fumes suction
external free standing unit
Laser source type
CO2 - 10.6 µm - sealed type - RF Air liquid cooled
Laser power
25W / 50W / 100W / 200W
Laser beam delivery
mirrors and XY movable cutting head
Laser spot diameter
100 µm
Cutting speed
until to 1.2 m/s
Acceleration
15 m/s²
Optics cleaning
internal or external air / external gas
User interface
local keyboard
Software
Focuscut X - Videocut
Laser product Class
class 3R (EN-60825-1:2003-02)
class IIIa (USA-CDRH 21 CFR)
Safeties
protective enclosures + laser beam stop access panel with safety interlocks
Material positioning
red light laser pointer on the cutting head (optional)

 

The Manufacturer reserves the right to make modifications and improvements without prior warning

To receive further information on the Proel Products, please compile and send us the following form
Something went wrong, please try again later. Thank You! Your message has been sent. Please enter a correct Captcha answer.